Prestressed concrete lintels and Composite and non-composite lintels- Walls.

Saturday, February 5, 2011

Prestressed concrete lintels 

Prestressed, precast concrete lintels are used particularly over internal openings. A prestressed lintel is made by casting concrete around high tensile, stretched wires which are anchored to the concrete so that the concrete is compressed by the stress in the wires. Under load the compression of concrete, due to the stressed wires, has to be overcome before the lintel will bend.
Two types of prestressed concrete lintel are made, composite lintels and non-composite lintels.

Composite and non-composite lintels.
Composite lintels are stressed by a wire or wires at the centre of their depth and are designed to be used with the brickwork they support which acts as a composite part of the lintel in supporting loads. These comparatively thin precast lintels are built in over openings and brickwork is built over them. Prestressed lintels over openings more than 1200 mm wide should be supported to avoid deflection, until the mortar in the brickwork has set. When used to support blockwork the composite strength of these lintels is considerably less than when used with brickwork.

Non-composite prestressed lintels are made for use where there is insufficient brickwork over to act compositely with the lintel and also where there are heavy loads.

These lintels are made to Suit brick and block wall thicknesses, as illustrated in Fig. 92. They are mostly used for internal openings, the inner skin of cavity walls and the outer skin where it is covered externally.

Precast, or prestressed lintels may be used over openings in both internal and external solid walls. In external walls prestressed lintels are used where the wall is to be covered with rendering externally and for the inner leaf of cavity walls where the lintel will be covered with plaster.

Precast reinforced concrete lintels may be exposed on the external face of both solid and cavity walling where the appearance of a concrete surface is acceptable.

Fig. 92 Prestressed lintels.

Related Posts by Category:




0 comentarios:

Post a Comment

 
 
 

Labels